Ilsintech Swift Multi-Pack F is designed to assemble Swift fusion SOC with any splicer as well as Swift fusion splicers.4 functions, stripping, cleaning, cleaving and sleeving, are in this single unit.
This Swift Multi-Pack F satisfies users’ needs with its efficient and productive design. Remember, this unit can be used for other company’s splicers. Furthermore, users see very unique two functions from the Optical Power Meter & Visual Fault Locator in this unit; they easily see the result of splicing in real time. (ALLINONE+)
• Stripping
No scratches from heated stripping
Over one-million cycle motorized
Stripping time : 1.5 sec
Over 5kg/f Tensile Strength of fiber after stripping
• Cleaning
One-touch pump
Easy to refill cleaning alcohol
• Cleaving
Single-action cleaving
Fiber chip collector attached
Features
• Stripping
No scratches from heated stripping
Over one-million cycle motorized
Stripping time : 1.5 sec
Over 5kg/f Tensile Strength of fiber after stripping
• Cleaning
One-touch pump
Easy to refill cleaning alcohol
• Cleaving
Single-action cleaving
Fiber chip collector attached
• Sleeving
Specifications
• Stripped length 250um
• Fiber Diameter 0.25 ~ 0.9mm
• Blade Lifetime More than 100,000
• Motor Lifetime 1000000
• Fiber Type Single Fiber
• Tensile Strength Test More than 3Kgf
• Heating Time 0.1 ~ 15ec
• Heating Temperature 60 ~ 150℃
• Method Air-pump
• Cleaning Spec. 10ml / 24 times
• Cleaning Liquid Alcohol
• Cleaving Length 7mm
• Blade Lifetime 50000
• Temperature 130 ~ 200℃
• Time 10 ~ 150sec
• Sleeve Length 60mm
• Fiber Type 250, 900, 2 ~ 4 Connector 4Type(SC, FC, LC, ST)
• Dimension 145x137x98mm
• Weight 1.2kg
• Power range(dBm) 10 to - 55
• Calibrated wavelengths(nm) 850, 980, 1300, 1310, 1450, 1490, 1550, 1590, 1625
• Power uncertainty(dB) ±5%
• Resolution(dB) 0.01
• Tone detection(Hz) 270, 300, 1k, 2k
• Display unit dB/dBm/W
• Warm-up time(sec) 0
• Optical adapter type SC(Standard) FC, ST(Optional)
• Firmware upgrade Enable
• Operating temperature -10°C to 50°C
• Storage temperature -40°C to 70°C
• Relative humidity 0% to 95% non-condensing
• Laser source Class 3b laser diode
• Laser wavelengths(nm) 650nm (nominal)
• Fiber compatibility SM and MM
• Output port Universal adapter for connectors with 2.5mm ferrules
• Output mode CW or flashing(2~3 Hz)
• Output power >10mW into single mode fiber
• Operating temperature -10°C to 50°C
• Storage temperature -40°C to 70°C
• Relative humidity 0% to 95% non-condensing
• Blade Lifetime More than 100,000
• Motor Lifetime 1000000
• Fiber Type Single Fiber
• Tensile Strength Test More than 3Kgf
• Heating Time 0.1 ~ 15ec
• Heating Temperature 60 ~ 150℃
• Method Air-pump
• Cleaning Spec. 10ml / 24 times
• Cleaning Liquid Alcohol
• Cleaving Length 7mm
• Blade Lifetime 50000
• Temperature 130 ~ 200℃
• Time 10 ~ 150sec
• Sleeve Length 60mm
• Fiber Type 250, 900, 2 ~ 4 Connector 4Type(SC, FC, LC, ST)
• Dimension 145x137x98mm
• Weight 1.2kg
• Power range(dBm) 10 to - 55
• Calibrated wavelengths(nm) 850, 980, 1300, 1310, 1450, 1490, 1550, 1590, 1625
• Power uncertainty(dB) ±5%
• Resolution(dB) 0.01
• Tone detection(Hz) 270, 300, 1k, 2k
• Display unit dB/dBm/W
• Warm-up time(sec) 0
• Optical adapter type SC(Standard) FC, ST(Optional)
• Firmware upgrade Enable
• Operating temperature -10°C to 50°C
• Storage temperature -40°C to 70°C
• Relative humidity 0% to 95% non-condensing
• Laser source Class 3b laser diode
• Laser wavelengths(nm) 650nm (nominal)
• Fiber compatibility SM and MM
• Output port Universal adapter for connectors with 2.5mm ferrules
• Output mode CW or flashing(2~3 Hz)
• Output power >10mW into single mode fiber
• Operating temperature -10°C to 50°C
• Storage temperature -40°C to 70°C
• Relative humidity 0% to 95% non-condensing
Product Category Contact Us |